Gutters & Downspouts

These are generally not required on steel buildings. However, use of these components often enhances the appearance of a building, control drip, splash and drainage.

Gutters and downspouts are an optional accessory that serves as trim. Gutters dramatically improve the appearance of buildings, and we recommend them for most building applications. Downspouts control the water falling from the roof, preventing the water from splashing up on the sides of the building.

On every Metal Building Depot building, die-formed ridge caps are used to cover the peak opening in the center ridge of the building. Some sellers provide a ridge roll cover that must be sealed with closures. Installing ridge roll trim is not an easy task. Over time the exposed foam closures deteriorate and there can be potential leak problems. Our die-formed ridge caps match the panel profile perfectly and are formed to fit the pitch of the roof. Die-formed ridge caps create an almost seamless transition across the roof.

RESIDENTIAL

Your decision to build is an important one. You have pictured yourself owning your own building, built just the way you want. You have imagined every detail, inside and out. It is a treasured vision, a promise you have made to yourself. And because your business operation is different from any other, your ideas about what you and your company want in a facility are unique. Your dealer, who is backed by a team of professional engineers, can help you turn your dream into a reality. Dealers have worked with a multitude of owners and developers to design efficient, economical structures that reflect the appropriate image for their operations. Architects and engineers will work with your dealer to design a building to meet your individual requirements. We can also work personally with you, your architect's plans, through your dealer to engineer a building system which uses practical, sensible, quality materials to achieve and complete your objective.

Using only the highest quality materials available, factory trained craftsmen use sophisticated Computer Aided Manufacturing (CAM) equipment to fabricate your building materials. Our commitment to excellence, attention to detail, and high quality workmanship assures you ease of construction, saving you money in time and labor. You have worked and planned to build a building that you can be proud of, and will serve your needs through the years to come; a place which is uniquely yours, a facility that is just as you imagined it. An establishment that brings your special ideas to life. It is an approach that lets you save money, yet build exactly the type of establishment you have always dreamed would be yours someday. This type of approach has pleased thousands of owners just like you. It is a concept that lets you use the pioneer spirit of people working together - you, your dealer, and Metal Building Depot, Inc. - to fulfill your own special vision of the American Dream . . . to build the building of your dreams today. Our steel frame load bearing wall systems with steel partitions provide attractive secure units. The use of fluted block, brick, wood, stucco, or steel can enhance the overall appearance to help attract even more customers.

Facings

In addition to acting as a decorative protection barrier, facings serve an integral part of the overall insulation system. Facings provide vapor barriers, light reflectivity and structural strength. In some cases, a reinforcement of fiberglass scrim is used for extra rigidity and greater impact resistance.

The effectiveness of a vapor barrier depends on three primary factors:

1) Location within the insulated section

2) Permeance

3) Proper installation

COMMERCIAL OFFICES

Your place of business should and can be more than just a place to work. It should reflect your company's image and be no less comfortable, functional or attractive than your living environment. Entry-ways and lighting, interior wall placement, and location of restrooms are as important in your office building as they are in your own home. Properly planned, your facility will serve your needs for many years to come, and you will avoid future changes or costly remodeling.

Modern ceiling and interior wall systems are very easily adapted to our manufactured building components using standard methods. For instance, perimeter sheet rock walls may be installed by simply attaching metal furring strips (hat channel) to the secondary wall framing members (girts). Similarly, acoustic panel or dry-wall ceilings may be installed by simply wrapping the ceiling suspension wires around the secondary roof framing members (purlins). Additionally, port-a-wall systems may be installed as needed throughout the structure.

Additional loads from heating and air conditioning systems, dropped ceilings, electrical conduit and lighting fixtures, or large mechanical sprinkler systems can be accommodated easily at your request with minimal cost, assuring a full roof-load certification.

The building components may represent a small percentage of the total cost of your office budget. Therefore, we are careful to ensure that the main structural components we provide will be reliable, helping to protect your investment against any water seepage, leaks or storm damage that can deteriorate your office complex.

When selecting the manufacturer of your building components, careful consideration must be given to both function and price. Your dealer will encourage you to have an architect review all aspects of your building plan, including lighting requirements, window heights, storage space, carpet wear ability, entrances, landscaping, parking and signage, to ensure you of a facility that will maintain its value and be a source of pride for years to come.

Gutters & Downspouts

These are generally not required on steel buildings. However, use of these components often enhances the appearance of a building, control drip, splash and drainage.

Gutters and downspouts are an optional accessory that serves as trim. Gutters dramatically improve the appearance of buildings, and we recommend them for most building applications. Downspouts control the water falling from the roof, preventing the water from splashing up on the sides of the building.

On every Metal Building Depot building, die-formed ridge caps are used to cover the peak opening in the center ridge of the building. Some sellers provide a ridge roll cover that must be sealed with closures. Installing ridge roll trim is not an easy task. Over time the exposed foam closures deteriorate and there can be potential leak problems. Our die-formed ridge caps match the panel profile perfectly and are formed to fit the pitch of the roof. Die-formed ridge caps create an almost seamless transition across the roof.